Development of eco-friendly biofilms by utilizing microcrystalline cellulose extract from banana pseudo-stem.

Banana pseudo-stem, often considered as an underutilized plant part was explored as a potential reinforced material to develop an eco-friendly biofilm for food packaging applications. In this study, Microcrystalline cellulose (MCC) was extracted from banana pseudo-stem by alkali and acid hydrolysis treatment. The extracted MCC was used as a reinforced material in different concentrated polyvinyl alcohol (PVA) matrix alone as well as both PVA and Carboxymethyl Cellulose (CMC) matrix to develop biofilm by solvent casting method. The synthesized MCC powder was characterized by scanning electron microscope to ensure its microcrystalline structure and to observe surface morphology. The biofilms composed of MCC, PVA, and CMC were assessed through Fourier-transform infrared spectroscopy (FTIR), mechanical properties, water content, solubility, swelling degree, moisture barrier property (Water Vapor Permeability - WVP), and light barrier property (Light Transmission and Transparency). The FTIR analysis showed the rich bonding between the materials of the biofilms. The film incorporating a combination of PVA, CMC, and MCC (S6) exhibited the highest tensile strength at 26.67 ± 0.152 MPa, making it particularly noteworthy for applications in food packaging. MCC incorporation increased the tensile strength. The WVP content of the films was observed low among the MCC-induced films which is parallel to other findings. The lowest WVP content was showed by 1% concentrated PVA with MCC (S4) (0.223 ± 0.020 10-9 g/Pahm). The WVP content of S6 film was also considerably low. MCC-incorporated films also acted as a good UV barrier. Transmittance of the MCC induced films at UV range were observed on average 38% (S2), 36% (S4) and 6% (S6) which were almost 6% lower than the control films. The S6 film demonstrated the lowest swelling capacity (1.42%) and water content, indicating a significantly low solubility of the film. The film formulated with mixing of PVA, CMC and MCC (S6) was ahead in terms of food packaging characteristics than other films. Also, the outcomes of this study point out that MCC can be a great natural resource for packaging applications and in that regard, banana pseudo-stem proves to be an excellent source for waste utilization.

Development of highly-reproducible hydrogel based bioink for regeneration of skin-tissues via 3-D bioprinting technology.

3-D Bioprinting is employed as a novel approach in biofabrication to promote skin regeneration following chronic-wounds and injury. A novel bioink composed of carbohydrazide crosslinked {polyethylene oxide-co- Chitosan-co- poly(methylmethacrylic-acid)} (PEO-CS-PMMA) laden with Nicotinamide and human dermal fibroblast was successfully synthesized via Free radical-copolymerization at 73 °C. The developed bioink was characterized in term of swelling, structural-confirmation by solid state 13C-Nuclear Magnetic Resonance (NMR), morphology, thermal, 3-D Bioprinting via extrusion, rheological and interaction with DNA respectively. The predominant rate of gelation was attributed to the electrostatic interactions between cationic CS and anionic PMMA pendant groups. The morphology of developed bioink presented a porous architecture satisfying the cell and growth-factor viability across the barrier. The thermal analysis revealed two-step degradation with 85 % weight loss in term of decomposition and molecular changes in the bioink moieties By applying low pressure in the range of 25-50 kPa, the optimum reproducibility and printability were determined at 37 °C in the viscosity range of 500-550 Pa. s. A higher survival rate of 92 % was observed for (PEO-CS-PMMA) in comparison to 67 % for pure chitosan built bioink. A binding constant of K ≈ 1.8 × 106 M-1 recognized a thermodynamically stable interaction of (PEO-CS-PMMA) with the Salmon-DNA. Further, the addition of PEO (5.0 %) was addressed with better self-healing and printability to produce skin-tissue constructs to replace the infected skin in human.

Silver and gold nanoparticles induced differential antimicrobial potential in calli cultures of Prunella vulgaris.

BACKGROUND: Prunella vulgaris is medicinally important plant containing high-valued chemical metabolites like Prunellin which belong to family Lamiaceae and it is also known as self-heal. In this research, calli culture were exposed to differential ratios of gold (Au) and silver (Ag) nanoparticles (1:1, 1:2, 1:3, 2:1 and 3:1) along with naphthalene acetic acid (2.0 mg NAA) to investigate its antimicrobial potential. A well diffusion method was used for antimicrobial properties. RESULTS: Here, two concentrations (1 and 2 mg/6 µl) of all treated calli cultures and wild plants were used against Escherichia coli, Pseudomonas aeruginosa, Salmonella typhi, Bacillus atrophaeus, Bacillus subtilis, Agrobacterium tumefaciens, Erwinia caratovora and Candida albicans. Dimethyl sulfoxide (DMSO) and antibiotics were used as negative and positive controls. Here, the calli exposed to gold (Au) nanoparticles (NPs) and 2.0 mg naphthalene acetic acid (NAA) displayed the highest activity (25.7 mm) against Salmonella typhi than other extracts, which was considered the most susceptible species, while Agrobacterium tumefaciens and Candida albicans was the most resistance species. A possible mechanism of calli induced nanoparticles was also investigated for cytoplasmic leakage. CONCLUSION: From the above data it is concluded that Prunella vulgaris is medicinally important plant for the development of anti-microbial drugs using nanotechnology and applicable in various pharmaceutical research.

Stimulation of secondary metabolites by copper and gold nanoparticles in submerge adventitious root cultures of Stevia rebaudiana (Bert.).

Nanotechnology is one of the advance technologies that almost found implications in every field of science. The importance is due to the unique properties of nanoparticles. In this study, bimetallic alloys of copper (Cu) and gold (Au) were tested in submerge root cultures of Stevia rebaudiana for production of biomass and secondary metabolites. A known amount of inoculum roots were submerged in liquid Murashige and Skoog medium containing combination of naphthalene acetic acid (NAA; 0.5 mg l-1) and different ratios of nanoparticles (NPs). NAA augmented medium was used as control. The addition of nanoparticles (30 µg l-1) stimulated biomass accumulation (1.447 g/flask) on 27th day of log phases. The maximum total phenolics content (TPC; 16.17 mg/g-DW) and total flavonoids content (TFC; 4.20 mg/g-DW) were displayed using AuCu-NPs (1:3) and NAA. The same combinations enhanced total phenolic production (TPP; 116 mg/L) and total flavonoid production (TFP; 29.5 mg/L) in submerged cultures. A strong correlation was observed between phenolics, flavonoids and dry biomass. Moreover, maximum 1, 1-diphenyl-2-picrylhydrazyl (DPPH) activity of 79% was displayed by addition of AuCu (1:3) nanoparticles. In conclusion, nanoparticles application has shown a positive effect in enhancing biomass and secondary metabolites production in adventitious root cultures of Stevia rebaudiana.

Seed germination and biochemical profile of Silybum marianum exposed to monometallic and bimetallic alloy nanoparticles.

In recent years nanotechnology has become increasingly important in almost every field. The new and improved physical, chemical and biological properties of material at nanoscale have far reaching implications in the fields of science and technology. Nanoparticles' effect on various plant species must be investigated to develop a comprehensive toxicity profile for nanoparticles. The current study strives to evaluate the effects of nine types of metal nanoparticles including monometallic and bimetallic alloy nanoparticles [Ag, Au, Cu, AgCu (1:3), AgCu (3:1), AuCu (1:3), AuCu (3:1), AgAu (1:3), AgAu (3:1)] on seed germination, root and shoot growth and biochemical profile of Silybum marianum plant. Seed germination was greatly affected and increased significantly upon treatment with nanoparticles' suspensions and was recorded highest for Ag nanoparticle suspension. Metal nanoparticles also had a significant effect on the biochemical profile of S. marianum. For the first week, the effect on DPPH, total phenolics content, total flavonoids content, total protein content, peroxidase activity and superoxide dismutase activity was enhanced, but declined as the time progressed. Among the nanoparticles being used, the effect of Ag nanoparticle was mostly enhancing. The results obtained are significant in mapping the effects of different monometallic and bimetallic nanoparticles on medicinal plant species.

Synthesis and characterisation of metal nanoparticles and their effects on seed germination and seedling growth in commercially important Eruca sativa.

The synthesis, characterisation and application of metal nanoparticles have become an important and attractive branch of nanotechnology. In current study, metallic nanoparticles of silver, copper, and gold were synthesised using environment friendly method (polyols process), and applied on medicinally important plant: Eruca sativa. Effects of application of these nanoparticles were evaluated on seed germination frequency and biochemical parameters of plant tissues. Seeds of E. sativa were germinated on Murashige and Skoog (MS) medium incorporated with various combinations of nanoparticles suspension (30 µg/ml). Phytotoxicity study showed that nanoparticles could induce stress in plants by manipulating the endogenous mechanisms. In response to these stresses, plants release various defensive compounds; known as antioxidant secondary metabolites. These plants derived secondary metabolites having a great potential in treating the common human ailments. In the authors study, small-sized nanoparticles showed higher toxicity levels and enhanced secondary metabolites production, total protein content, total flavonoids content and total phenolics content.